您好!欢迎进入来到康华尔电子京瓷晶振专营!

手机端 手机二维码收藏KON微信号 微信号 网站地图

康华尔电子-中国供应商

ShenZhen KONUAER Electronics CO. LTD

KYOCERA CRYSTAL CO,LTD

全国统一服务热线:

0755-27838351

京瓷晶振

京瓷晶振直销点

当前位置首页 » 晶振解决方案 » 遥遥领先威尔威新型时钟振荡器适用于航空航天

遥遥领先威尔威新型时钟振荡器适用于航空航天

返回列表 来源:康华尔京瓷晶振 查看手机网址
扫一扫!遥遥领先威尔威新型时钟振荡器适用于航空航天扫一扫!
浏览:- 发布日期:2023-10-07 16:42:38【
分享到:

遥遥领先威尔威新型时钟振荡器适用于航空航天,Wi2Wi宣布推出坚固、可靠的新型DL4系列石英晶体时钟振荡器

多伦多,Wi2Wi公司全球领先的端到端无线连接解决方案、高精度频率控制、定时和微波滤波设备开发商和制造商(“Wi2Wi”或“公司”)很高兴宣布推出一款坚固、可靠的新型DL4系列振荡器。

“我们非常高兴地宣布我们新的DL4系列加固型振荡器。这一新的振荡器系列将Wi2Wi提升到基于石英晶体产品的不同性能水平,并为该市场的更多创新铺平了道路。这进一步扩大了Wi2Wi的频率控制和定时设备组合。这一新的DL4系列满足石油和天然气行业以及航空电子、医疗和军事市场最苛刻的技术要求。我们继续开发同类最佳的产品系列,以满足这些细分市场不断增长的需求。这是我们今年迄今为止发布的第四款同类最佳产品;无线连接产品系列和时序和频率控制器件产品系列各2个,未来还会有更多。”董事会主席迈克尔·索南里奇说。

“我们对新的DL4系列振荡器的发布感到非常兴奋,该系列OSC晶振可用于许多市场中各种要求苛刻的应用,在这些市场中,性能和功能对于各种工作温度和极端环境条件至关重要。DL4系列超出了我们客户最严格的性能要求。我们一直致力于根据客户的需求开发新产品,并确保我们生产的每个类别的产品种类齐全。”Wi2Wi总裁兼首席执行官扎卡里亚·马修斯(Zachariah Mathews)说。

“研发团队对DL4系列所达到的性能水平非常满意。在200°C的温度下经受了数小时的振动,以及在最恶劣的环境下进行的所有其他规格测试后,DL4系列超过了客户要求的所有规格。我们为我们的研发团队取得这一伟大成就感到非常自豪。”工程副总裁巴里·阿内森说。遥遥领先威尔威新型时钟振荡器适用于航空航天.

DL系列晶体振荡器是专门设计和制造的,在最极端的环境条件和温度下,其可靠性和稳定性超过了行业要求。DL4系列经过了严格的可靠性和环境测试,符合并超过了MIL-STD-202方法214随机振动的所有测试条件。为了在振动和老化条件下实现卓越的性能,DL4系列采用镀金4点石英晶体底座,并采用小型8.89毫米x 7.25mm毫米x 4.32毫米双密封陶瓷J引脚表面贴装(SMD)封装。这种坚固、耐用和可靠的振荡器系列可在很宽的温度范围内工作;从-55°C到+200°C,可承受200°C的振动,而不会影响性能、稳定性和可靠性。所提供的频率包括32.768kHz的特殊频率,并可通过LVCMOS逻辑输出类型在500kHz至80MHz的宽频率范围内进一步定制。DL4有源晶振是细分市场中众多应用的理想选择;石油和天然气工业、航空电子设备、军事、医疗和工业。应用包括井下石油钻探、自然资源勘探设备、飞机发动机传感器、地热传感器、航空航天和军事安全通信以及工业仪器和传感器等.

Type/Series Package Output Frequency Range Dimensions Features
LV5 SMD
Seam
Welded
LVDS 40MHz to 200MHz 5.00mm x 3.20mm x 1.20mm Low
Phase
Noise
LV7 SMD
Seam
Welded
LVDS 40MHz to 200MHz 7.0mm x 5.0mm x 1.8mm 3.3V and
2.5V
Available
O08 DIP8 TTL/CMOS
LVCMOS
30KHz to 200MHz 13.2mm x 13.2mm x 5.6mm 4-Pin
E/D Optional
O14 DIP14 TTL/CMOS
LVCMOS
30KHz to 200MHz 20.4mm x 12.8mm x 5.08mm 4 to 14 - Pin
E/D Optional
OC2 SMD
Seam
Welded
TTL/CMOS
LVCMOS
30KHz to 50MHz 2.5mm x 2.0mm x 1.0mm Small
Footprint
OC3 SMD
Seam
Welded
TTL/CMOS
LVCMOS
30KHz to 80MHz 3.2mm x 2.5mm x 1.0mm Small
Footprint
OC5 SMD
Seam
Welded
TTL/CMOS
LVCMOS
30KHz to 200MHz 5.0mm x 3.2mm x 1.3mm Wide
Frequency
Range
OC7 SMD
Seam
Welded
TTL/CMOS
LVCMOS
30KHz to 200MHz 7.0 x 5.0 x 1.8mm 5V
Available
PE5 SMD
Seam
Welded
LVPECL 40MHz to 200MHz 5.0mm x 3.2mm x 1.2mm Low
Jitter
PE7 SMD
Seam
Welded
LVPECL 40MHz to 200MHz 7.0 x 5.0 x 1.8mm E/D
Optional
DH-1 Ceramic SMD CMOS 32.768 KHz 7.86mm x 3.60mm x 2.00mm Rugged Design
Wide Operating
Temp Range
DL-4 Ceramic J-Lead LVCMOS 0.5MHz - 80MHz 8.89mm x 7.37mm x 4.32mm Rugged Design
Wide Operating
Temp Range
FC7 SMD Seam Weld LVCMOS
LVDS
LVPECL
10MHz to 1GHz 7.0mm x5.0mm x1.8mm Rugged Design
Wide Operating
Temp Range
JC7 J Lead
Gull Wing
Thru Hole
TTL/CMOS
LVCMOS
HCMOS
30KHz - 200MHz 7.0mm x 5.0mm x 1.6mm
JL9 Ceramic
J-Lead
TTL/CMOS
LVCMOS
HCMOS
30KHz - 200MHz 14mm x 9mm x 4.7 mm E/D Optional
JL4 Ceramic
J-Lead
TTL/CMOS
LVCMOS
30KHz - 200MHz 8.9mm x 7.4mm x 4.3 mm 1.8V to 3.3V
available
关于物联网和M2M

本质上,物联网和M2M描述了嵌入了电子设备、软件、传感器和网络连接的物理对象或“东西”的网络,这使得这些对象能够收集和交换数据。在几个因素的推动下,包括宽带互联网可用性的增长,这降低了连接成本,以及Wi-Fi功能和无数技术中内置的传感器的相关增长,这被描述为物联网的“完美风暴”。几乎任何带有开关的设备都可以连接到互联网(和/或相互连接)——从手机、咖啡机、洗衣机、耳机、灯、可穿戴设备、汽车,以及喷气式飞机引擎或石油钻机的机器部件。据分析公司Gartner称,到2020年,联网设备将超过260亿台。其他人认为这个数字可能太保守了四倍。

关于Wi2Wi公司

Wi2Wi是一家垂直整合的技术公司,设计、制造和销售高性能、低功耗无线连接解决方案、全球导航卫星系统(GNSS)模块和频率控制设备。该公司的时钟振荡器产品和服务面向物联网(IoT)、机器对机器(M2M)、航空电子、太空和政府资助项目市场的众多应用。Wi2Wi的产品和增值服务为全球客户提供高度集成、坚固耐用、稳定可靠的多协议无线执行器和嵌入式软件,以及定制的定时和频率控制设备。该公司成立于2005年,战略总部设在加利福尼亚州圣何塞,在威斯康星州米德尔顿和印度海德拉巴设有分支机构。Wi2Wi的制造业务、可靠性和质量控制实验室以及定时和频率控制设备的设计和工程位于威斯康星州米德尔顿。位于印度海得拉巴的分公司专注于无线连接的开发;硬件和软件都有。Wi2Wi的战略目标是通过提供端到端无线集成解决方案和高度可定制的定时和频率控制设备来满足每个客户的独特需求。Wi2Wi不同于商品级产品,它是市场上性能最佳、高度可靠、低功耗的无线连接产品,集成了支持更宽温度范围和更长产品生命周期的软件。此外,Wi2Wi的端到端产品解决方案可帮助客户大幅降低其终端产品费用、认证成本和总体R&D投资,并大幅缩短上市时间。Wi2Wi与技术、制造和销售领域的一流全球领导者合作该公司利用遍布全球的制造商代表网络来推广其产品和服务,并与世界一流的分销商合作完成订单和直接销售。

TORONTO, Wi2Wi Corporation ("Wi2Wi" or the "Company"), a leading global developer and manufacturer of end to end Wireless Connectivity Solutions, high precision Frequency Control, Timing, and Microwave Filter devices, is pleased to announce a rugged, robust and reliable family of Oscillators in the new DL4 Series.

“We are very pleased to announce our new DL4 series of rugged oscillators. This new family of Oscillators elevate Wi2Wi to a different level of performance for quartz crystal based products and paves the way for more innovation in this market. This further expands Wi2Wi's frequency control and timing devices portfolio. This new DL4 series meets the most demanding technical requirements from the Oil and Gas industry as well as Avionics, Medical and Military markets. We continue to develop the best in class family of products to satisfy the increasing demand from these market segments. This is the fourth best in class product we have released so far this year; 2 each from the Wireless Connectivity product line and the Timing and Frequency Control Device product line, with more to come.”said Michael Sonnenreich, Chairman of the Board.

“We are excited about the release of the new DL4 Series of oscillators for use in a wide variety of demanding applications across many markets where performance and functionality are essential for awide range of operating temperatures and extreme environmental conditions. The DL4 Series exceeds our clients’ most stringent performance requirements. We have been focusing extensively on developing new products based on our clients’ demand and to assure a full line of products in each category we produce. ” said Zachariah Mathews, President and CEO of Wi2Wi.

“The R and D team is very pleased with the level of performance achieved with the DL4 series. After being subjected to many hours of vibration at 200°C,along with all other specification tests under the harshest environments, the DL4 series outperform all specifications required by the our clients. We are very proud of our R and D team for this great achievement."Said Barry Arneson, VP of Engineering.

The DL series of oscillators are designed and manufactured specifically to outperform the Industry’s requirements in reliability and stability under the most extreme environmental conditions and temperatures. The DL4 Series has under gone through rigorous reliability and environmental testing to meet and exceed all test conditions per MIL-STD-202 METHOD 214 random vibration. For superior performance under vibration and aging,the DL4 series implemented a gold plated, 4 point, quartz crystal mount and comes in a small 8.89mm x 7.25mm x 4.32mmdouble hermetically sealed ceramic J-Lead Surface mount (SMD) package. This rugged, robust and reliable family of oscillators operates at a wide range of temperatures; from -55°C to +200°C and withstands vibrations at 200°C without compromising performance, stability and reliability. Frequencies offered include special frequency of 32.768 kHz and can be further customized in a wide range of frequencies from 500 kHz to 80MHz with LVCMOS logic output type. DL4 is ideal for numerous applications in the market segments; Oil and Gas industry, Avionics, Military, Medical and Industrial. Applications include down hole oil drilling, natural resource exploration equipment, aircraft engine sensors, geothermal sensors, aerospace and military secure communications as well as industrial instruments and sensors, to name a few Samples and production units are readily available.

About IoT and M2M

Essentially, IoT and M2M describethe network of physical objects or "things" embedded with electronics, software, sensors, and network connectivity, which enables these objects to collect and exchange data. Driven by several factors including the growth in the availability of Broadband Internet, which reduces the cost of connecting, and the related increase in Wi-Fi capabilities as well as sensors built into myriad technologies, this has been described as the “perfect storm” for the IoT. Almost any device with an on and off switch that can be connected to the Internet (and/or to each other) – anything from cell phones, coffee makers, washing machines, headphones, lamps, wearable devices, cars, as well as machine components in the engine of a jet airplane or the drill of an oil rig. According to analyst firm Gartner, by 2020 there will be over 26 billion connected devices. Others think this figure could be too conservative by a factor of four.

About Wi2Wi Corporation

Wi2Wi is a vertically-integrated technology company which designs, manufactures and markets high performance, low power wireless connectivity solutions, global navigation satellite system (GNSS) modules, and frequency control devices. The Company's products and services address numerous applications in the markets of Internet of Things (IoT), Machine to Machine (M2M), Avionics, Space, and Government Sponsored Projects. Wi2Wi's products and value-added services provide highly integrated, rugged, robust, and reliable multiprotocol wireless actuators with embedded software, along with customized timing and frequency control devices for customers, worldwide. The Company was founded in 2005 and is strategically headquartered in San Jose, California with satellite offices in Middleton, Wisconsin and Hyderabad, India. Wi2Wi's manufacturing operations, its laboratory for reliability and quality control, together with design and engineering for timing and frequency control devices are located in Middleton, WI. The branch office, located in Hyderabad, India, focuses on the development of wireless connectivity; both hardware and software. Wi2Wi's strategic objective is to service the unique needs of each customer by providing end to end wireless integration solutions and highly customizable timing and frequency control devices. Wi2Wi distinguishes itself from commodity grade products, with best in the market performance, highly reliable, low power wireless connectivity products with integrated software that supports broader temperature ranges and a longer product life cycle. Furthermore, Wi2Wi's end to end product solutions helps the customer substantially reduce their end product expense, certification cost, and overall R&D investment, in addition to substantially reducing the time to market. Wi2Wi has partnered with best in class global leaders in technology, manufacturing, and sales. The Company uses a wide network of manufacturer's representatives, worldwide, to promote its products and services, and has partnered with world class distributors for the fulfillment of orders along with direct sales.