Jauch有源振荡器介绍

Jauch有源振荡器介绍，对于拥有高度创新能力的OSC晶振元器件品牌公司而言是不怕被比下去的，而相对于擅长打磨自身价值的Jauch公司更是如此，能够在激烈的市场斗争之中找到自身的定位以及挖掘出巨大的价值，从而为物联网产品带来更多选择的空间，并提供更加完美的解决方案，使得用户能够快速识别到其的价值，同时与之建立起良好的合作关系，这也为Jauch公司未来的发展奠定良好的发展轨迹。

If you want to equip your product with an oscillator, and there is hardly an electronic application that can do without, you must define the operating voltage of your application first because oscillators are usually “calibrated” to a specific voltage value. A precise frequency requires a constant and predetermined working voltage. If deviations occur, the oscillator will create an inaccurate frequency, which can ultimately lead to malfunctions. This is an industry standard, but now, with the new JO22 and JO32 crystal oscillators, Jauch provides more flexibility.

Precision and Flexibility

The two new products are special; they generate an extremely stable frequency even with a variable operating voltage. In a voltage range from 1.8 Volts to 3.3 Volts, the oscillators perform with minimum frequency variation. This applies even if the operating voltage changes during operation. Manufacturers of electronic applications benefit for many reasons using these new parts. First of all, they are more flexible in the usage of the oscillators. Second, the new components are particularly suitable for installation in battery powered devices due to their low power consumption. Finally, the oscillators deliver the desired frequency with the highest precision over a measurably longer period, even if the battery voltage drops.

Small Multi-Talents for the Internet of Things

Thanks to the special characteristics and the small size (2.5 x 2 x 0.8 millimeters and 3.2 x 2.5 x 1.1 millimeters, respectively), the new oscillators are particularly popular in wearables and compact IoT applications. They could be used in portable devices, wireless sensors or intelligent radiator thermostats, to name just a few areas of application.

Both oscillators are available with operating temperature ranges of -40 to +125 degrees Celsius. They are 100 percent lead-free and both are RoHS and REACH compliant. Both components are also free of conflict minerals.

如果您想为产品配备振荡器，并且几乎没有哪种电子应用离不开振荡器，您必须首先定义应用的工作电压，因为振荡器通常被“校准”到特定的电压值。精确的频率需要恒定且预定的工作电压。如果出现偏差，振荡器将产生不准确的频率，最终导致故障。这是一个行业标准，但现在，随着新的JO22和JO32

石英晶体振荡器，Jauch提供了更多的灵活性。

精确度和灵活性

这两种新产品很特别；即使工作电压变化，它们也能产生极其稳定的频率。在从1.8伏到3.3伏的电压范围内，振荡器以最小的频率变化运行。即使工作电压在工作期间发生变化，这一点也适用。使用这些新器件，电子应用制造商受益匪浅。首先，它们在振荡器的使用上更加灵活。第二，由于其低功耗，新组件特别适合安装在电池供电的设备中。最后，即使电池电压下降，振荡器也能在相当长的时间内以最高的精度提供所需的频率。Jauch有源振荡器介绍.

面向物联网的小多元人才

由于特殊的特性和小尺寸(分别为2.5x2x0.8毫米和3.2x2.5x1.1毫米)，新振荡器在可穿戴设备和紧凑型物联网应用中特别受欢迎。它们可用于便携式设备、无线传感器或智能散热器恒温器等应用领域。

两款有源晶振的工作温度范围均为-40至+125摄氏度。它们100%无铅，符合RoHS和REACH标准。这两种成分也不含冲突矿物。